-
Ingco Cordless drill 12V 2Battery and Charger
- Battery Voltage:12 V , Powerful 3-5 hours battery ,
- No load speed : 0-550 Rpm
- Forward and Reverse speed setting
- Chuck size : 0.8 -10 mm , Battery Runout brake system
- 15 Plus 1 speed setting , For usage of drilling and screwdriwer
KSh 4,500.00KSh 6,500.00Buy via WhatsAppIngco Cordless drill 12V 2Battery and Charger
KSh 4,500.00KSh 6,500.00 -
HEATGUN 2000 WATTS
-
Voltage:220V-240V~50/60HzInput power:2000WTemperature:stage 1:50°Cstage 2:380°Cstage 3:570°CAirflow:stage 1:500L/minstage 2:300L/minstage 3:500L/min
KSh 3,000.00KSh 4,700.00Buy via WhatsAppHEATGUN 2000 WATTS
KSh 3,000.00KSh 4,700.00 -
-
Ingco Hand Riveter 32Inch Folding
This folding hand rivet is a handy tool which can be used to drive rivets. it is also referred as pneumatic hammer as it acts like a hammer.
KSh 3,000.00Buy via WhatsAppIngco Hand Riveter 32Inch Folding
KSh 3,000.00 -
DCA CIRCULAR SAW 7” INCH WITH WARRANT CARD
The DCA AMY185 Electric Circular Saw is used for sawing wood, rigid plastic in wood venues or outdoor, it can also be used with a table saw with tripod. It can groove on wood, cut all kinds of plastic plates, plastic coated board, new soft material, thin aluminum, wood, and concrete plate.
KSh 7,500.00KSh 10,500.00Buy via WhatsAppDCA CIRCULAR SAW 7” INCH WITH WARRANT CARD
KSh 7,500.00KSh 10,500.00 -
Ingco 12pcs Router Bits Set(8mm)
- Shank diameter: 8mm
- 3pcs Straight bit:6mm,12mm,16mm
- 1pcs 1/2″ 90°V-groove bit
- 1pcs 1/2″ Dovetail bit
- 1pcs 32mm 45°Chamfer bit
- 1pcs 1/2″ flush trim bits
- 2pcs Corner round bit:1/4″,3/8″
- 1pcs 1/4″ Core box bit
- 1pcs 1/4″ Core bit
- 1pcs R-4 Roman ogee bit
- Packed by plywood case
KSh 3,000.00KSh 4,500.00Buy via WhatsAppIngco 12pcs Router Bits Set(8mm)
KSh 3,000.00KSh 4,500.00 -
Ingco 67 Drill Bits
GZ Industrial Supplies is the distributor and supplier of Ingco Tools and equipment in Nigeria. Our 67 PCS Accessories Set INGCO HKTAC010671 is solid and designed to last long.
KSh 5,000.00Buy via WhatsAppIngco 67 Drill Bits
KSh 5,000.00 -
Ingco CAR WASH MACHINE WITH 2200PSI AND 1800WATTS
Versatile car pressure washer
Powered by a 1800 watt motor
Comes with large size 5 meter hose
Features shampoo bottle, foaming bottle
Max Flow Rate: 6 Liters/Minute
Pressure: 150 Bar
Motor: 1800 Watt
Voltage: 220 – 240 VoltKSh 14,000.00KSh 17,000.00Buy via WhatsAppIngco CAR WASH MACHINE WITH 2200PSI AND 1800WATTS
KSh 14,000.00KSh 17,000.00 -
Ingco 97 Pcs Tool Chest Set
- 97 Pcs Tool Chest Set
- Chest part:
- Overall size:520*218*243mm
- Thickness of Cabinet:0.8mm
- Thickness of drawer:0.6mm
- With 1pcs 506*215*63mm Top Tracy Area
- With 2pcs 449*196*54mm drawer
KSh 19,000.00KSh 22,000.00Buy via WhatsAppIngco 97 Pcs Tool Chest Set
KSh 19,000.00KSh 22,000.00 -
Generic 100kg Digital Platform Weighing Scale
Specifications
- Highly accurate and precise sensors
- Capacity to store up to 7 unit prices
- Weight, unit price, total price LED display
- Stainless Steel
- Runs on built-in 4V rechargeable battery or AC power
- 40 hours continuous use from a single charge
- Waterproof and oil proof keyboard
- Extra large stainless stain platform
- Power tare, zero, low battery, Power indicators
- Auto-zero tracking: slight shock won’t affect zero figures
KSh 7,000.00KSh 8,500.00Buy via WhatsAppGeneric 100kg Digital Platform Weighing Scale
KSh 7,000.00KSh 8,500.00 -
Angle Grinder Machine 2400w Ingco
- SPECIFICATIONS:
►Voltage: 220-240V~50/60Hz
►Input power: 2400W
►No-load speed: 6300rpm
►Spindle thread: M14
►Disc Diameter:230mm(9”)
►With 1pc auxiliary handle
►With 1 set carbon brush
KSh 12,000.00KSh 14,000.00Buy via WhatsAppAngle Grinder Machine 2400w Ingco
KSh 12,000.00KSh 14,000.00 - SPECIFICATIONS:
-
Dera HIGH QUALITY ELECTRIC ROUTER
Wood Router, equipped with the right rotary cutter for chamfering, grooving, surface finishing, curving cutting, wood edge planing, pattern processing and other operations on wood, plastic sheet, wood veneer and other similar materials. It is widely used in wood processing, furniture
KSh 11,000.00KSh 14,000.00Buy via WhatsAppDera HIGH QUALITY ELECTRIC ROUTER
KSh 11,000.00KSh 14,000.00 -
Ingco G Clamp Cast Iron 4″ / 5″ / 6″
A C-clamp or G-clamp is a type of clamp device typically used to hold a wood or metal workpiece, and often used in, but are not limited to, carpentry and welding.KSh 1,500.00KSh 20,000.00Buy via WhatsAppIngco G Clamp Cast Iron 4″ / 5″ / 6″
KSh 1,500.00KSh 20,000.00 -
TCL 300KG HIGH QUALITY DIGITAL PLATFORM HEAVYDUTY SCALE
The platform scale is a low cost and highly accurate measuring equipment which is most suitable for super markets, grocery stores and other retail outlets. The scale is made using highly accurate and precise sensors. It is with capacity to store up to 5 unit prices and 99 accumulation memories. It is a versatile machine because it also runs on rechargeable battery in case of lack of mains power.
KSh 7,500.00KSh 10,500.00Buy via WhatsAppTCL 300KG HIGH QUALITY DIGITAL PLATFORM HEAVYDUTY SCALE
KSh 7,500.00KSh 10,500.00 -
Wood Router DCA – 1600W With 12Bits
Wood Router, equipped with the right rotary cutter for chamfering, grooving, surface finishing, curving cutting, wood edge planing, pattern processing and other operations on wood, plastic sheet, wood veneer and other similar materials. It is widely used in wood processing, furniture manufacturing and other industries
KSh 10,000.00KSh 16,000.00Buy via WhatsAppWood Router DCA – 1600W With 12Bits
KSh 10,000.00KSh 16,000.00 -
-
Ingco Reciprocating Saw
- Voltage:220-240V~50/60Hz
- Rated power:750W No-load speed:900-3300rpm
- Max.cutting depth:
- Wood:115mm
- Steel:8mm
- Aluminum:12mm
- SDS blade change chuck
KSh 7,500.00KSh 8,600.00Buy via WhatsAppIngco Reciprocating Saw
KSh 7,500.00KSh 8,600.00 -
1/2” Socket Set Ingco HKTS12122 12Pcs
- 10 Pcs metric sockets: 10, 11, 12, 13, 14, 15, 17, 19, 21, 24mm
- 1/2″ drive 72T quick release ratchet
- 1/2″ drive 5″/125mm extention bar
- Industrial/trade quality
- Material: Cr-V (50BV30), heat treated
KSh 2,500.00KSh 4,000.00Buy via WhatsApp1/2” Socket Set Ingco HKTS12122 12Pcs
KSh 2,500.00KSh 4,000.00 -
Ingco Double Open End Spanner Set
Ingco Item No : HKSPA20888pcs double open end spanner setSize : 6-22mm6 x 7 mm, 8 x 9 mm, 10 x 11 mm, 12 x 13 mm, 14 x 15 mm,16 x 17 mm, 18 x 19 mm, 20 x 22 mmFine polishedPacked by plastic hangerKSh 2,000.00KSh 3,000.00Buy via WhatsAppIngco Double Open End Spanner Set
KSh 2,000.00KSh 3,000.00 -
KSh 8,500.00
KSh 10,000.00Buy via WhatsApp12v Cordless Drillset WITH 135 PIECES TOOLSET
KSh 8,500.00KSh 10,000.00 -
117 Pcs DRILLSET WITH 750WATTS DRILL
This machine is ideal for impact drilling in brick, concrete and stone as well as for drilling in wood, metal and plastic. Machines with electronic control and right/left rotation are also suitable for screwdriving and thread-cutting.
KSh 7,500.00KSh 10,000.00Buy via WhatsApp117 Pcs DRILLSET WITH 750WATTS DRILL
KSh 7,500.00KSh 10,000.00 -
Cordless Drill 18V With 2 Batteries MEAKIDA
Meakida 18Voltage Cordless drill is used to make holes on a metal surface to make an intricate home decor piece or drilling holes in wood to make a piece of furniture. This machine can make your work easy and effective.
KSh 5,500.00KSh 8,000.00Buy via WhatsAppCordless Drill 18V With 2 Batteries MEAKIDA
KSh 5,500.00KSh 8,000.00 -
INGCO 1600WATTS CIRCULAR SAW
Voltage: 220-240V~50/60Hz Input power: 1400W No-load speed:5000rpm Blade diameter: 185x20mm Cutting capacity: 45 degree: 44mm90 degree: 65mm Adjustable cutting depth Adjustable bevel cutting With 1pcs 185mm blade With 1set extra carbon brushesKSh 8,500.00KSh 10,500.00Buy via WhatsAppINGCO 1600WATTS CIRCULAR SAW
KSh 8,500.00KSh 10,500.00 -
IMPACT DRILL 13MM 650W
This machine is ideal for impact drilling in brick, concrete and stone as well as for drilling in wood, metal and plastic. Machines with electronic control and right/left rotation are also suitable for screwdriving and thread-cutting.
KSh 4,500.00KSh 6,000.00Buy via WhatsAppIMPACT DRILL 13MM 650W
KSh 4,500.00KSh 6,000.00 -
Rotary Hammer
KEY FEATURES
- Voltage:220-240V~50/60Hz
- Input power:1800W
- No-load speed:850rpm
- Impact rate:4200bpm
- Impact energy:7.0J
- Max.drilling capacity:
- Concrete:36mm
- Steel:13mm
- Wood:42mm
- SDS plus chuck system
- With 3 drills and 2 chisels
- Packed by BMC
KSh 14,000.00KSh 15,000.00Buy via WhatsAppRotary Hammer
KSh 14,000.00KSh 15,000.00
